Tuesday, February 26, 2013

Service Crane Hydraulic Batam Indonesia

crane_hydraulic
Hydraulic cranes are very simple by design but can perform Herculean tasks that would otherwise seem impossible. In a matter of minutes, these machines are able to raise multi-ton bridge beams on highways, heavy equipment in factories and even lift beachfront houses onto pilings.
When watching a hydraulic truck crane in action, it’s hard to believe just how much weight it’s moving because it deals with these multi-ton objects with relative ease. Hydraulic truck cranes vary in lifting power. It’s easy to tell how much a particular hydraulic truck crane can lift just by the name of it: A 40-ton crane can lift 40 tons (80,000 lb or 36,287 kg).
crane_hydraulic_0Truck-mounted crane
A crane mounted on a truck carrier provides the mobility for this type of crane.  Generally, these cranes are designed to be able to travel on streets and highways, eliminating the need for special equipment to transport a crane to the jobsite. When working on the jobsite, outriggers are extended horizontally from the chassis then down vertically to level and stabilize the crane while stationary and hoisting. Many truck cranes possess limited slow-travelling capability (just a few miles per hour) while suspending a load. Great care must be taken not to swing the load sideways from the direction of travel, as most of the anti-tipping stability then lies in the strength and stiffness of the chassis suspension. Most cranes of this type also have moving counterweights for stabilization beyond that of the outriggers. Loads suspended directly over the rear remain more stable, as most of the weight of the truck crane itself then acts as a counterweight to the load. Factory-calculated charts (or electronic safeguards) are used by the crane operator to determine the maximum safe loads for stationary (outriggered) work as well as (on-rubber) loads and travelling speeds.  Truck cranes range in lifting capacity from about 14.5 US tons to about 1300 US tons.
Rough terrain crane
A crane mounted on an undercarriage with four rubber tires that is designed for pick-and-carry operations and for off-road and “rough terrain” applications. Outriggers that extend horizontally and vertically are used to level and stabilize the crane for hoisting.
These telescopic cranes are single-engine machines where the same engine is used for powering the undercarriage as is used for powering the crane, similar to a crawler crane. However, in a rough terrain crane, the engine is usually mounted in the undercarriage rather than in the upper, like the crawler crane.
Crawler crane
A crawler is a crane mounted on an undercarriage with a set of tracks that provide for the stability and mobility of the crane. Crawler cranes have both advantages and disadvantages depending on their intended use. The main advantage of a crawler is that they can move on site and perform lifts with very little set-up, as the crane is stable on its tracks with no outriggers. In addition, a crawler crane is capable of traveling with a load. The main disadvantage of a crawler crane is that they are very heavy, and cannot easily be moved from one job site to the next without significant expense. Typically, a large crawler must be disassembled and moved by trucks, rail cars or ships to be transported to its next location.  Crawler cranes range in lifting capacity from about 40 US tons to 3500 US tons.
Service Crane Hydraulic Batam Indonesia
PT.CALTAV INDONESIA is a company specialized in Hydraulic system and Electrical system, Servicing, overhaul and Commissioning for ship deck machineries and Ship deck crane, including Trading and other supplies for marine and offshore industries.
Deck Machineries categories :
  • Hydraulic Anchor Windlass
  • Hydraulic Anchor Handling Towing Winch
  • Hydraulic Towing Winch
  • Hydraulic Storage Reel
  • Hydraulic Tugger Winch
  • Hydraulic Capstan
  • Hydraulic Shark Jaw and Towing Pin
  • Hydraulic Crane
  • Hydraulic Press
  • Hydraulic Ram door
  • Hydraulic Remote Control for Cargo & Ballast Line Valves
  • Hydraulic Steering Gear
  • Hydraulic Hatch Cover
  • Hydraulic Central Lubrication
Crane categories :
  • Deck Crane Service
  • Telescopic Crane
  • Knuckle Crane
  • Provision Crane
Other Equipment :
  • Hydraulic Cylinder such as Lifting Cylinder, Ramp Cylinder and etc.
  • Hydraulic Power Pack Unit (HPU)
Trading supplies :
  • Hydraulic spares (hydraulic motor, hydraulic pump, seal kits), Industrial hoses and fittings.
  • Electrical parts (marine cable, solenoid DCV, contactors, etc) and Electric Motor spares.
  • Marine Engine, Genset, Compressor, Pump Spare Parts.
  • Rigging items such Chain, Wire Ropes, Polypropylene rope, Shackles, and fitting accessories.
  • General Hardware & etc.
We also responsible and familiar for installation, troubleshooting, and commissioning of electrical system of the winches and crane for PLIMSOLL, MEP System (Marine Equipment Product), ME (Marine Equipment) and any brands.
With our strong skill and good team work, we believe can deliver & complete our job successfully and made the customer satisfaction on job result.
Should you have any queries, please don t hesitate to contact us, and we will attend on customer queries to give Technical support, care and solution in everywhere.
With thanks and regards,
PT.CALTAV INDONESIA
Sumatera Convention Center
5th Floor Room 506
Jl.Engku Putri No.1, Batam Center
29464 Indonesia
Tel : +62 778 470006
Fax : +62 778 470006
Mobile: +62 813 7222 2944
email : isra.junaidi@caltav.com
Website : www.caltav.com